R35T Carbon Road/CX Rim - Light Bicycle

Comments on Falcon RIM R35T

35mm deep tubular super light 25mm wide rims 700C high TG resin surface

Tomas 2018/11/22

Hello, would be possible to order 1pcs of rim RRU35T02 for 22 holes meant for the nipples? https://www.lightbicycle.com/35mm-deep-tubular-super-light-25mm-wide-rims-700C-with-basalt-braking-surface.html Thank you in advance for your feedback. Best regards Tomáš Kulhavý

LightBicycle 2018/11/23

Hi Tomas, Yes, we can customize 22 spoke count on this road tubular rim for you. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Sam 2018/10/26

I weigh 64kg and I want these rims for disc brake, what is the lightest they can be made?

LightBicycle 2018/10/30

Hi Sam, The road disc version of RRU35T02 (25mm wide, 35mm deep, tubular) is 360g+/-15. Our rims are full handbuilt, so there's a tolerance window to the weight. If you are looking for a light profile. I can mark to our factory to make the rim as light as possible for you. under 360g. Is this ok with you? Pls note that the recommended tire width is 23~38c. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Alistair 2018/10/13

would your 35mm depth 25mm width carbon tubular disc rims beck for mud and dry cyclocross races,

LightBicycle 2018/10/15

Hi Alistair, We will have 28mm wide/36mm deep tubular rims. Does it work for your cyclorcross bike? Thanks, Lightbicycle

takashi 2018/10/29

Do you have that product in stock? (width 28mm, deep 36mm, cyclocross) Please email me. Best regards.

LightBicycle 2018/10/30

Hi Takashi, Usually, we don't have road bike rims in stock. The production for rims is 12 days, will this time window be ok with you? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Sam 2018/10/26

I weigh 64kg and I want these rims for disc brake, what is the lightest they can be made?

LightBicycle 2018/10/27

Hi Sam, The disc version of RRU35T02 road disc(25mm wide, 35mm deep, tubular) is 360g+/-15. Our rims are full handbuilt, so there's a tolerance window to the weight. If you are looking for a light profile. I can mark to our factory to make the rim as light as possible for you. under 360g. Is this ok with you? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

alyosha 2018/07/31

what is the internal width of the rim if I want to set them up tubeless? thanks

LightBicycle 2018/08/01

Hi Alyosha, The RRU35C02 (17.9mm inner/35mm outer width, clincher) is the one that you looking for since you want to set up a tubeless wheelset. You can see the rim profile from the attachment. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Stephen 2018/03/11

Hi I am considering ordering the ‘disc brake’ version of this rim (35mm tubular). Is it possible to use some more layers of carbon fibre to make the tyre-bed more impact resistant (for cyclocross use)? Do you use standard or ‘high tg’ resin for the disc brake version of this rim? Also, can you post the rims to Australia, and how long would it take for them to arrive? Thanks

LightBicycle 2018/03/12

Hi Stephen, We can make a heavy duty version for RRU35T02, adding 50g material for one rim. For our U-shape rims with brake surface, we use High TG resin for the brake surface. Base on our lab experiment data, it can take over 240-degree heat. If you order disc rims, the resin will not be high TG resin. Of course, we can ship to Australia. The heavy-duty version rim is a special order, so it would take 12 days when you place the order. Another 3~5 days to delivery to you. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Ignace 2017/12/10

Hi, it is possible to have two lightest RRU35T02 rim in 3k glossy 24/28 disc ? How much weight the lightest rims from this model ? Are they ok for me and my 85kg for cyclocross ?

LightBicycle 2017/12/11

Hi Ingace, We can manufacture the lighter RRU35T02 rims (3k glossy, 24H/28H) for you. It will be around 335g, does that work for you? You are not a large rider, so the rim is strong enough for your riding. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

José 2017/11/15

Hello You can choose the decals of the item no. rg922 Thank you

LightBicycle 2017/11/16

Dear José, For graphic, we have attached newest road decal(not removable) and newest stickers(removable) for your choice. Or do you like no graphic? Thanks, Lightbicycle

LightBicycle 2017/11/16

Dear José, For graphic, we have attached newest road decal(not removable) and newest stickers(removable) for your choice. Or do you like no graphic? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Reid 2017/11/07

What is the price to have these built with Novatec disc hubs? Do the novatec hubs have replaceable end caps for use with different axles (ie. qr and 15mm thru)? Thank you,

LightBicycle 2017/11/08

Hi Reid, For end cap, do you mean adaptor(as attached)? If yes, which axle size do you want? D791SB/D792SB from 15*100mm to 100mm QR? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Rob 2017/06/28

How much to post a single rim 700c 35mm tubular to New Zealand please

LightBicycle 2017/06/29

Hello Rob, Thanks for your inquiry. Please find our quotations as below. All pricing in USD. -RRU35T02 (tubular rim): 360 /-15g, $145/pcs -WR38T02 rear wheel (with DT 350 non-disc hub, Sapim cx-ray spokes): $363/pcs -Delivery cost: $58.40 for one rim or $77.80 for one wheel to New Zealand by EMS Please let us know if there is any other questions. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

S 2016/10/15

Do you have a 35mm U shape rim tubular ud matte finish 28 hole with or without braking surface in stock/already made or would I have to wait to have one built before being shipped? Estimated total wait time? Regards, S

Light-Bicycle 2016/10/17

Hello Sir, Thanks for your inquiry. Sorry, we don’t have any road rims in stock. It takes 12 days for rims manufacturing. And EMS delivery takes another 4-7 days to arrive. Does it work for you? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Henrik 2016/08/31

Hi What is the weight for the 35 mm U-shape rim for disc (with out breaking surface) ?? Best regards Henrik

Light-Bicycle 2016/09/01

Hello Henrik, The U35mm tubular rim without brake track is 350 /-15g. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

david 2016/08/13

Hi, Is it possible to get them with dt 350 hubs and get both 12x135mm and 12x142mm endcaps for the rear wheel and 12x100m for the front wheel? Wheelset look like this: 35mm tubular rims 28h non braking track ud finish no decals 28h dt350 hubs centerlock straigtpull. 12x100m front, 12x142mm rear 12x135mm endcaps 11spd shimano black dt spokes black brass nipples cost with shipping to sweden? Delivery time? Regards David

Light-Bicycle 2016/08/15

Hello David, Thanks for your inquiry. Currently, only DT 350 front 15mm TA/ rear 12*142mm TA are available. We don’t have the convert kit for 12*135mm TA here, and the front 12*100mm will be available around 2 months later. Is it too long for you to wait it? Or you can order the rims only and build the wheels and buy the convert kits at your local shops. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

FuelForThought 2016/07/31

Please quote RRU35T02, Disc only (no brake track), Matt UD, front 28H/rear 28H, black Sapim CX-Ray, black alu nipples, DT240s straight pull, centerlock rotor, 12x142 rear axle, 15x100 front axle. Could you also quote the price with DT350s instead of DT240s?

Light-Bicycle 2016/08/01

Hello Fuel, Thanks for your inquiry. Please find our quotations as below. WRU35T02 (with DT 240S disc hubs): $935/pair WRU35T02 (with DT 350 disc hubs): $730/pair Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Jai 2016/06/19

Hi, Can you do these rims centre drilled (with non-angled holes) for triplet lacing (like Fulcrum wheels)? Or even better angled holes 2 drive side, one non-drive side. Many thanks,

Light-Bicycle 2016/06/20

Hello Jai, Thanks for your inquiry. For center drilling, do you like the rims with offset or drilling in center line? For Fulcrum wheels, they use 2:1 drilling. Please find attached pictures. Is that what you like? Method A or Method B? How many spoke holes do you like for front & rear? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

<< Return to Shop

1 2

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.

Customize

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Essential Cookies

Cookies required to enable basic website functionality.
Performance Cookies

Cookies used to understand how the website is being used.
Preference Cookies

Cookies that are used to enhance the functionality of the website.
Advertising Cookies

Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies

Save Preferences

Reject All Cookies

Save Preferences

Reject All Cookies

Accept All Cookies