cart
cart
USD
  • USD
  • AUD
  • CAD
  • EUR
  • GBP
  • SEK
cart

Rim/Wheelset

Mountain Bike

Road/Gravel/CX Disc

Road Bike (Rim Brake)

E-Bike NEW

Tri/TT/Track

Fat Bike

BMX/Folding Bike

Frameset >>

Equipment

light-bicycle-navigation-bar-full-custom.jpeg

Full Custom

Made to Order
light-bicycle-navigation-bar-quick-buy.jpeg

Quick Buy

In Stock
light-bicycle-navigation-bar-north-american-shop.jpeg

North American Warehouse
light-bicycle-navigation-bar-european-warehouse.jpeg

European Warehouse
NEWS.jpg
take-a-photo-of-your-bike.jpeg
road-riding-on-tarmac-roads.jpeg
rim-test-section.jpeg

Purchase Advice

After-Sales Service

help-center-2

Help Center
FAQs
Our-Story.jpg
Light-Bicycle-employees.jpg
carbon-fiber-rim-factory-tour.jpg
CONTACT-US.jpg

Pre-Sale Open: 20% Off Airia Wheelsets！>>> Pre-Sale Open: 20% Off Airia Wheelsets！>>>   00 Days  00 : 00 : 00 00 Days  00 : 00 : 00

Build Your Recon RIM AM933/EN933

All wheels are 100% customizable at Light Bicycle. If your preferred specs are not listed, feel free to contact us (sales@lightbicycle.com) with your special requirements described.


Buy wheelset

RIM SPECS

  • Model AM933/EN933
  • Material Toray T700 & T800 Premium Carbon Fiber
  • Size 29"/29er (ETRTO 622mm)
  • Series RECON
  • Intended Use All Mountain/Enduro
  • Bead Type Hookless
  • Tubeless Capable Yes
  • Inner/Outer Width 33mm/39mm
  • Depth 28mm
  • ERD 583mm (not including nipple head dimension)
  • Rim Weight AM 460+/-15g, EN 510+/-15g
  • Profile Asymmetric (3mm)
  • Max Cyclist Weight (on flat ground) 125kg/ 276lbs
  • Spoke Hole Angle ±8°
  • Spoke Tension 115~130kgf front disc side and rear drive side
  • Max Tire Pressure 40psi/ 2.75bar
  • Recommended Tire Width 2.3"-3.1"

MTB carbon rim profile

TECH

Wider, stronger and stiffer. When aggressive riding is in your DNA, the 933 is the rim answering the call. With a wide profile, this rim is designed to work perfectly with the new breed of ultra wide trail tires. This huge air volume will give you stability and an insane amount of traction that will encourage riding in the nastiest of conditions. The ability to safely run lower pressure while enjoying the lightweight, quiet and dampened ride carbon provides, will have you shredding the trails like never before.

This rim comes in two different layup styles. While the standard layup is suitable for most riders, the EN version features an extra layer of 3k carbon for heavier riders, or those notoriously tough on equipment. Not only does this help support G-Out forces, but it also makes the EN933 one of our stiffest options.

E-bike Approved! This rim's Enduro Version is designed to be compatible with mid-drive e-bikes.

PC-MTB-asymmetric-rim-Recon-series-tech.jpg
MO-MTB-Recon-series-carbon-rim-technologies.jpg
Pad-mountain-asymmetric-rim-recon-series.jpg

Learn More >>

WARRANTY

For Non-Pro Series Rims: From the date of purchase, 3-year Standard Warranty.

For Pro Series Rims: From the date of purchase, 5-year Pro Warranty as standard and an upgraded optional lifetime Premium Warranty with minimum charge.

Crash Replacement: It is applicable with the same period as the warranty time range that you purchased for the rims with 10% /25% discount for Non-Pro series /Pro series.

Learn More >>

3-years-warranty.png

WHAT IS IN THE BOX

Package_carbon-rims-mtb.jpg
Package_mtn-carbon-rim-sticker-decal-kit.jpg
Package_light-bicycle-user-manual.jpg
Package_tubeless-valve-stems.jpg
Package_carbon-rim-tapes.jpg
Package_carbon-rims-mtb.jpg
Package_mtn-carbon-rim-sticker-decal-kit.jpg
Package_light-bicycle-user-manual.jpg
Package_tubeless-valve-stems.jpg
Package_carbon-rim-tapes.jpg

Overview

Specs

Tech

Warranty

In The Box

Wider, stronger and stiffer. When aggressive riding is in your DNA, the 933 is the rim answering the call. With a wide profile, this rim is designed to work perfectly with the new breed of ultra wide trail tires. This huge air volume will give you stability and an insane amount of traction that will encourage riding in the nastiest of conditions. The ability to safely run lower pressure while enjoying the lightweight, quiet and dampened ride carbon provides, will have you shredding the trails like never before.

This rim comes in two different layup styles. While the standard layup is suitable for most riders, the EN version features an extra layer of 3k carbon for heavier riders, or those notoriously tough on equipment. Not only does this help support G-Out forces, but it also makes the EN933 one of our stiffest options.

E-bike Approved! This rim's Enduro Version is designed to be compatible with mid-drive e-bikes.

Gallery

mullet-hardtail-mountain-bike-29-275
Tom : Perfect wheels for my aggressive custom tjd pinion equipped hardtail, awesome tracking on tech and off camber. No pinch flats with this wheelset either. I ride everything on this bike, big mountains, bikepacking, steep tech.
UK(Britain)
1
light-bicycle-carbon-enduro-wheelset
Light Bicycle : Rims: EN933 12K Glossy 32H External Hole No Drain Holes With Access Holes Hubs: Chris King ISO B Silver 15/110mm 12/148mm BOOST J-bend 6-bolt 32H 72T Sram XD Spokes: Sapim CX Ray Black J-bend Nipples: Sapim Aluminium Black External
1
carbon-mullet-mtb-wheelset-light-bicycle-mullet-33
Light Bicycle : Rims: EN933 29er-F EN733 27.5-R Glossy Braided UD 32H With Access Holes Hubs: Chris King ISO AB ISO B 3D Violet 15/110mm 12/148mm Boost J-bend 6-bolt 72T Sram XD Spokes: Provided by the customer Sticker: Purple
1
cotic-mtb-on-light-bicycle-am933-wheels
Susan : I have built 3 sets of wheels with light bicycle rims. Very impressed by the quality! Light, stiff, true and strong! So far they have lasted me a couple of seasons of hard riding (including emtb riding). The LB people are very nice to work with and the price is unbeatable. I have absolute confidence in the quality of their products.
United States
1
PASSILA-MTB-29ER-ON-LIGHT-BICYCLE-AM933-WHEELS
Jukka : AM933 has been a solid performer for two years now
Finland
1
orbea-mtb-29er-on-lightbicycle-am933-carbon-wheels
Marco : They are great!! Light, strong, and beautiful to look at. Have been wanting a set of these for the last 3 years, now I finally made the purchase and couldn't be happier with them.
Mexico
1
AM933-carbon-mtb-wheelset-29er
Light Bicycle : Rims: AM933 Matte 12K 32/32H No Drain Holes With Access Holes Hubs: Industry Nine Hydra Purple 15/110mm 12/148mm Boost 6-bolt 690T Shimano MTB 10/11S Spokes: Sapim D-Light j-bend black Nipples: Sapim aluminum blue & purple
1
DT-Swiss-hubs-with-Berd-spokes
Light Bicycle : Rims: AM933 Matte UD 28H No Drain Holes With Access Holes Hubs: DT Swiss 180 15/110mm 12/148mm Boost Straightpull Centerlock Ceramic EXP 54 Shimano Micro Spline MS Spokes: Berd Polylight Black Nipples: Sapim Aluminum Blue Weight: 1266g
3

View More Reviews >>

COMMENTS

E

Ed 2023/08/14

How much is the most cheapest shipping to United States (New Jersey zip 07442) for 2 29" rims? Thanks. Ed

LightBicycle 2023/08/15

Hi Ed, Thanks for reaching out! We offer MTS-Sea as the shipping method to the USA, which is cost-effective. It's about $ 50 USD currently for two pcs 29'' rims to be shipped from the Global warehouse to your address. I have sent you more thru email, please check it :D BR, Light Bicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

P

Philipp 2022/11/21

Hallo, I'd like to know if it would be possible to have a lighter layup for light gravel riding done. I like the profile of the rim but it seems much to heavy to me. I'd like to lace them up with 24 spokes with internal nippels front and rear.

LightBicycle 2022/11/21

Hi Philipp, AM933 is a All Mountain specific rim 29er. So it was designed to run under 40psi. Will you run higher than this? We do have offset gravel specific rim you can check out. The AR28, it's 22mm internal, 28mm external width, and 28mm depth. The weight is 380g. Flyweight version is 330g. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

L

Lester 2020/07/16

Do you ship to the Philippines?

LightBicycle 2020/07/16

Hi Lester, Yes, we can ship to Philipines for sure. Could you tell me exactly what are you looking for ordering? mtb 29er rims or complete wheelset 29er? Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

J

Jason 2018/09/01

Hi, I have a pair of Hope Pro 4 hubs I wish to lace with these AM933 rims. What is the spoke length needed? My wheelbuild dimensions are: - axle size: front 15*110mm boost & rear 12*148mm boost - External hole rim - 32 hole - J-bend? - 3-Cross lacing

LightBicycle 2018/09/01

Hi Jason, Please check the spoke length that we use as below. Rims: AM933,29er rim, 32H, external nipple holes Hubs: Hope pro 4, boost front 15*110mm boost/rear 12*148mm boost, J-bend Nipples: 14mm long Lacing pattern: 3 cross Spoke length: front 283mm drive side, 282mm non-drive side rear 282mm drive side, 283mm non-drive side What nipples do you use? It will affect the spoke length also. Thanks, Lightbicycle

C

Cedric 2019/03/18

Hi, I am also building with hope pro 4 boost hubs. Do you recommend certain length/material nipples?

LightBicycle 2019/03/22

Hi Cedric, Mostly, we use 14G, 14mm length nipples on our wheelsets. As for material, we offer both alloy and brass. Brass is more durable than alloy mostly if you don't mind adding some weight. Thanks, Lightbicycle

T

Teodoro 2019/12/26

Hi, I’m also building a rear wheel with hope pro 4 hub, boost 148x12, 32 holes, 3 cross. Since I’ve only found spokes with even numbers length, what would be better for the rear non-drive side? 282 or 284 mm? Thanks

LightBicycle 2019/12/27

Hi Sir, According to our wheel building records, we used 284mm spokes for the non-drive side of the rear wheel 29er AM933 3 cross lacing. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

M

Matt 2019/12/20

Hi, I have a set of these rims already (AM933). I run these with WT Maxxis tires and love them! I'd like to ride in the winter too, and am considering buying Schwalbe Ice Spiker Pro Winter Tyres (studded 29 x 2.25). I'm concerned that these tires might not work well with the wider inner width of these rims being only 2.25" wide. What do you think?

LightBicycle 2019/12/21

Hi Matte, Our recommended tire range is 2.3"~3.1" for the AM933 (39mm wide) 29er mountain bike rim. The 29 x 2.25 tires would be a bit narrow but should be ok to mount on. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

M

manny 2019/06/19

Hi, are you guys able to drill a rim for 28 hole hubs? I would need two of them. Thanks.

LightBicycle 2019/06/19

Hi Manny, Sure, we can manufacture 29er bike rim AM933 with 28H spoke holes for you. You can add the rims to your card and finish the payment by this link. https://www.lightbicycle.com/site/share-cart?id=515 Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

G

Gary 2018/12/11

Hi, when shopping for rims is the price for one rim only or a set?

LightBicycle 2018/12/11

Hi Gary, The price is for one single 29er rim. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

D

Dunan 2018/11/09

Could I use this rim for e-bike ? if I go with the EN layup ? total weight of rider and bike about 108kg

LightBicycle 2018/11/10

Hi Duncan, This rim in EN version will be strong enough for E-bike. May i know what spokes and hubs that you will use? Is the spoke 14 gauge? Then we can check more detailly for you. Also, we will have E-bike models of rims/wheels in 2 months. If you are not urgent, you can wait for E-bike models. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

R

Riccardo 2018/10/27

1) Is it possible to have holes drilled only in the inner wall of the rim, so only in the side facing the hub? I'm aware that it's a pain to build the wheel in this way, routing nipples through the valve hole, but when done, I get an UST rim, also a bit stronger. 2) Offset is a value mandatory, or you can drill holes also with 2.5 mm offset instead of 3 mm?

LightBicycle 2018/10/27

Hi Riccardo, Yes, we can make a UST rim for you with no extra cost.The holes usually lie in the channel center, and the drilling is with +/-6 degree angle. Do you mean you want the drilling hole to be laid offset on the rim bed? Normally, we would make offset drilling on the plus or fat bike rims. This 29er rims profile is with 3mm offset. Do you mean drilling the spoke holes 2mm offset from the rim center line? Thanks, Lightbicycle

R

Riccardo 2018/10/27

It's highly welcome to have +/- 6 degree angled drills, why don't you declare it in rim description? It's a plus for it! I've no way to provide you an attachment, with a picture it'd have been much more clear, so, lease, look above in product page at black&white drawing with rim dimensions. I mean: don't do any hole at all on the side where there is "33" (this is already agreed by your answer) and apply a value of "2.5" in place of "3" on bottom side, the same for all holes of both DS and NDS. I'm just asking if the 3 mm offset can be reduced to 2.5 mm, without weakening the rim. I think that the answer depends on how the rim is built: if (1) in the area around the drill carbon thickness is constant for a while, and (2) you can easily apply this mod to the drilling machine configuration, it can be done. If instead carbon layer thickness decreases sharply when you leave the 3mm center spot, drilling 0.5 mm laterally from the center would reduce rim strenght, as that's also may be the most critical area of the rim. The reason for this request is that I'm going to use an hub with just 5 mm of difference in left and right flange distances from center, and I'd like to apply this uncommon feature to create a perfectly balanced wheel, but I need an asymmetric rim with an offset of just 2.5 mm. Your rims with 2.5/2.6 mm offset are all smaller than this one, that as the perfect measures I'm looking for, as I'm going to build an Enduro wheel tailored for 2.6" tyres.

LightBicycle 2018/10/29

Hi Riccardo, Great! We will list +/-6degree drilling on rim specs ASAP. This 29er rim is wider, so with 3mm offset profile design. If you like 2.5 mm offset drilling, we can work on the spoke holes with 2.5mm offset from the rim center line. I just sent an drawing about the drilling. Is it what you like? Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

G

Guillaume 2018/09/11

I’m interrested by the EN933 rims for tandem bike. But the weight that our bike will support is approximatly 150kg and the maximal weight that your rims support is 125kg. Do you think that it will be possible to chose it or it will be needed to taje something stronger ? Thank for your advice

LightBicycle 2018/09/15

Dear Guillaume, The weight limit is usually referred to the rider weight. If you are under 125kg, the wheelset would be ok for you. If you are doing aggressive riding or you want to reinforce the wheelset just in case. You can use round spokes and stronger hubs while building the wheelset. All in all, if you are lighter than 125kg and not doing very aggressive riding. 29er rims EN933 (enduro version) will be strong enough for you. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

G

Guillaume 2018/09/11

I’m interrested by the EN933 rims for tandem bike. But the weight that our bike will support is approximatly 150kg and the maximal weight that your rims support is 125kg. Do you think that it will be possible to chose it or it will be needed to taje something stronger ? Thank for your advice

LightBicycle 2018/09/12

Hi Sir, The weight limit is usually referred to the rider weight. If you are under 125kg, the wheelset would be ok for you. If you are doing aggressive riding or you want to reinforce the wheelset just in case. You can use round spokes and stronger hubs while building the wheelset. All in all, if you are lighter than 125kg and not doing very aggressive riding. EN933 (enduro version) will be strong enough for you. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

H

Huw 2018/08/04

I am interested in the en933 rims matte UD with 32 holes are these available from the European warehouse?

LightBicycle 2018/08/06

Hi Huw, Sorry, we don't have EN933 29er rims stock in Europe warehouse currently. If the import tax is the main issue that you worried about. You can choose our TPD (tax-prepaid delivery) for shipping. You won't have to pay any import tax. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

E

Eddie 2018/07/04

Hi if I place my order tomorrow how long till I received my rim? I will need it by Monday if next week. I'm going on a trip and need it asap. Please help. Do you ship from US? Thanks Eddie

LightBicycle 2018/07/05

Hi Eddie, Since you request the rims urgently to US. You should place the order from our North American site and make contact with our North American base colleague. But you should note that the US base only stock with the standard setup (UD, matte, 32H). Special orders are ordering to make. If your order is not UD matte 32H, normally it takes around 10 days to manufacture in China, and another 5~10 days for delivery. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

A

Alex 2018/03/23

hi i am looking for a front and rear Am rim how much would it cost for the set?

LightBicycle 2018/03/23

Hi Alex, Do you like AM933 29er rims only or you like to the complete wheelset(built with hubs, spokes and nipples)? Then we can quote accordingly. Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

M

michel 2018/02/02

I'd like to order just the front wheel AM933 DT 350 ',center lock, Boost, 28H , Sapim CXRAY spokes. How much is it?

LightBicycle 2018/02/03

Hi Michel, Thanks for your inquiry! It is okay to order front wheel only. The price for front wheel with following specs is USD479 each - Rim: AM933, UD matte 28H no decal - Hub: black DT Swiss 350, straight pull, center lock, 15*110mm boost - Spokes: black sapim cx-ray bladed straight pull - Nipples: black aluminum or brass? Thanks, Lightbicycle

REPLY

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

See all 20 customer reviews>>

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.
Customize
Accept

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Aceept All Cookies
Save Preferences
Reject All Cookies
Save Preferences
Reject All Cookies
Accept All Cookies