wider 700C 88mm carbon bicycle cyclo cross rim tubular

Comments on RIM RR88T02 road bike/cyclocross

Douglas 2018/07/27

I was wondering if you have a version of this 88mm deep tubular rim without the braking track? I need to build up a wheel set that will be used only on the Velodrome and will not need a brake track. Also, any rims deep than 88mm? Thanks for your time. Douglas

LightBicycle 2018/07/28

Hi Douglas, Hi Douglas, Do you like 88mm tubular disc wheelset? If yes, please check below link. You can pick disc hubs first, please find picture 01 for your reference. https://www.lightbicycle.com/carbon-88mm-wheels-road-bicycle-700c-tubular.html Or do you like full disc wheelset(no spokes) like the picture i sent in last emails? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Kyle 2018/06/14

Are the wider 700C 88mm carbon bicycle cyclo cross rim tubular for internal spoke nipples or extrenal spoke nipples. Thanks

LightBicycle 2018/06/15

Hi Kyle, We can do both internal and external nipples for bike rims. And no extra charge required. Which do you prefer? If you want internal nipples. I will create the invoice for you if you like. Or you can place the order online and mark your special request in the message box. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Tom 2017/10/04

Hi, I'm interested in the 25mm wide 88mm deep rims. Can you send me the cross-section profile. Thanks Tom

LightBicycle 2017/10/08

Hi Tom, Sorry for the late reply. We were on National Day vacation from October 1st to 7th. We are just back to work today. Please find attached rim profile of our 25mm wide 88mm deep tubular rim and let us know if there is any questions. RRU88T02: 25mm wide/88mm deep, 550g+/-20, USD175 each Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

matthew 2016/12/08

Hello, can you do custom spoke hole count? I need a 21 hole rim in ~88m Tubular. This is a strange type, but I am replacing a current rim and have photos to show that it is 21 holes. Thanks.

LightBicycle 2016/12/09

Hello Matthew, Thanks for your inquiry. Sure. We can manufacture the 88mm tubular rim in 21H. Is 21H drilled evenly on the rim? If not, please help to show us some pictures of the spoke hole drilling pattern. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

dan 2016/09/21

Do you have any images of carbon rims for disk brake? Is the brake track still visible? -dan

Light-Bicycle 2016/09/22

Hello Dan, Thanks for your inquiry. Please find attached pictures of our road rim without brake tracks for disc bike. If you order our new 25mm wide U shape 88mm rim, the brake track is invisible. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Kellan 2016/07/29

I noticed above that you described a new U shaped 88mm tubular in reply to a comment. Is that still available, and if so could you send the ERD and how to purchase one in 24H

Light-Bicycle 2016/07/29

Hello Kellan, Thanks for your inquiry. Yes, the new 25mm wide U shape 88mm rim is available. Rim profile attached for reference. And we will upload it on our website in next month. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Adam 2016/06/22

Hello, I wanted a 16H, 88mm tubular rim for a TT bike but the only one you have is described as a "cyclo-cross" rim. Do you have a suitable rim for a front wheel of a TT bike with those specs?

Light-Bicycle 2016/06/23

Hello Adam, Thanks for your inquiry. Our 88mm rim is able for time trial bike also. Currently, we have new U shape 88mm tubular rim. It is with special material and New high TG resin, it will provide better braking surface performance than basalt braking surface. Would you like to have a try? Rim profile attached for reference. It is okay to manufacture 16H for rims. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Tony 2016/01/29

Hi in interested in building a pair of 88mm rims with no brake surface for a track wheel set, wondering if you could post a pic of the gloss ud finish? Also do you offer a warranty on your rims?

Light-Bicycle 2016/02/01

Hello Tony, Thanks for your inquiry. RR88T02 (TUBULAR, disc): 540 /-15g $165/pcs Shipping with USD: $57 All pricing in USD. Please find attached picture of the rim in UD glossy. 3k/12k/UD are the 3 choices for cosmetic appearance. The rim strength & weight is virtually identical.3k matte & UD matte more popular. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Patison 2015/11/10

Hi, could you post image of cross section of this rim? Thanks

Light-Bicycle 2015/11/11

Hello Patison, Thanks for your inquiry. Please find attached cross-section drawing of 88mm depth rim. RR88T02 (23mm wide 88mm tubular rim): 540 /-15g, USD165/pcs Most of our customers choose rim weave in UD matte & 3k matte. Do you like it? Please find below link. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Mark 2015/03/18

I am interested in building track racing wheel set from your 88mm rims, tubular. Am I correct that you will allow me to chose the number of holes drilled? Are there rider weight limits for 32 hole 88mm tubular drilled rims? Thank you Mark Morgan mpmorgan075@me.com

Light-Bicycle 2015/03/19

Hello Mark, Thanks for your inquiry. RR88T02 (23mm wide 88mm tubular rim): 540 /-15g, USD165/pcs Please find attached rim cross-section drawing. For rim weave, do you prefer 3k, 12k or UD? Matte or glossy? Please find below link. http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ For spoke count, we can manufacture from 16H to 36H. It depends on customers’ order. So, we can manufacture the rim in front 32H/ rear 32H if you like. Do you need the braking surface on rims? The max weight limit of 88mm tubular rim is 130kg. Thanks, Light-bicycle

James 2015/04/07

Can you get carbon rims for use on the velodrome/track without the brake surface?

Light-Bicycle 2015/04/08

ello James, Thanks for your inquiry. Yes, our rim is ok for velodrome/track using, and manufactured without braking surface. RR88T02 (23mm wide 88mm tubular rim): 540 /-15g, USD165/pcs Please find attached rim cross-section drawing. For rim weave, do you prefer 3k, 12k or UD? Matte or glossy? 32H? Please find below link. http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

David 2014/04/28

I need a rear wheel made to handle 200lb rider on 20-25mph avg rides with commuting durability. Clincher only

Light-Bicycle 2014/04/29

Hello David, Thanks for your inquiry. Please find the attached cross-section drawing of the 23mm wide 88mm clincher rim. The max weight limit is 285lb. So, it’s OK for your weight. For the rear rim, do you prefer UD, 3k or 12k? Matte or glossy? 24H? http://www.flickr.com/photos/light-bicycle/sets/72157631432948364/detail/ Which rear hub do you prefer? Novatec hub or bitex hub? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

jeff 2014/02/16

Hi can you make 95mm clincher 23mm wide ud matte internal nipples? Thanks

Light-Bicycle 2014/02/17

Hello Jeff, Thanks for your inquiry. Currently, there is no 95mm depth rim. But we have 23mm wide 88mm clincher rim. Please find the attached cross-section drawing. Is it OK for you? It’s OK to manufacture the rims with UD matte for internal nipples. Do you prefer 20H/24H? Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Matt 2013/12/11

Hello - I'm interested in a set of wheels for single speed cyclocross. Can you build a set of 88mm rims to a 130mm single speed hub? I'd be interested in 28 spokes front and rear.

Light-Bicycle 2013/12/12

Hello Matt, Hello Matt, Thanks for your inquiry. Which single speed hub do you like? Is it the track hub as attached? For the 88mm rims, do you like clincher or tubular? It is ok to make wheelset with front 28/rear 28. Thanks, Light-bicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

<< Return to Shop

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.

Customize

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Essential Cookies

Cookies required to enable basic website functionality.
Performance Cookies

Cookies used to understand how the website is being used.
Preference Cookies

Cookies that are used to enhance the functionality of the website.
Advertising Cookies

Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies

Save Preferences

Reject All Cookies

Save Preferences

Reject All Cookies

Accept All Cookies